Shows the radio modems supported and the parameters to configure the communications ports.

 

 

In the case of Base RTK styles, the Radio modem box will be activated so that radio 1 or 2 can be selected. This enables the receiver to be configured with two different radios. It is enough to select “-”, so as not to take radio 2 into consideration.

 

The receiver’s radio can be configured by clicking on the Configure button. The radio’s configuration parameters should have been previously selected:

 

·         Port of the receiver to which the radio is connected.

·         Bits per second.

·         Parity

·         Data bits

·         Stop bits

 

 

The appropriate Frequency Table should first be selected in the configuration screen if there are various for the type of radio selected. Then the channel one wishes to set (by clicking Set Channel) should be selected from the Channel Listing. The radio’s current channel appears on this list by default.

 

A specific channel can be sought in the table selected by writing the number in the Channel box and clicking on the Find button.

 

In addition to the option to configure the channel, each modem radio may have a series of additional functions associated. For example, for ArWest digital radios the following are presented: